×

Lion-(K)Series»

Intelligent power supply of power amplifier



Introduction

1.Power Supply
“Lion” intelligent power supply of the power amplifier is quasi resonant full bridge topology, The high-frequency transformer magnetic core using cutting-edge technology of nanomaterials.

2.Amplifying Circuit
“Lion” intelligent amplifier can work long hours and under pressure with a loud voice power not smaller, and it also won't appear overheating protection. Power amplifier inside there is a real time automatic detection of load impedance circuit.
“Lion” intelligent power amplifier is not easy to overheatingprotection, the efficiency of the whole machine can reach 89 in 8 Ω condition.

3.Complete Appliance
“Lion” intelligent signal amplification signal processing of the power amplifier and power supply are interrelated. make the product stability and reliability to improve on an unprecedented scale.

4.Built-in high-performance DSP processor



Technical parameter

Model Lion-407K Lion-410K Lion-413K
Type 4 channel power amplifier
Power
(8 ohms stereo)
(4/2 ohms stereo)
(8/4 ohms bridge)

700W x 4
1200W x 4
2000W x 4

1000W x 4
1700W x 4
2800W x 4

1300W x 4
2000W x 4
3600W x 4
Built in DSP 48 bit
AD/DA converters 32 bit-96kHz
Frequency 20Hz ~ 20kHz
Slew rate >30v/us
Damping factor >300:1
S / N rate >100 dB
THD + N <0.08%@1kHz
Gain: 0 dB ~50dB , step 1dB(electronic attenuator)
Input sensitivity 0 dB ~ +20 dB
Input impedance 30k ohms / >15k ohms(Balanced: Stereo / Parallel)
Protection Overheat,short circuits,Dc,Limit and softstart,Output relay-zero current switch,intellectual clip limit
AC input voltage AC 160v~260v / 50Hz
Dimensions(WxHxD) 483 x 88 x 475(mm)
Net weight(Kg) 15 16 16.5




Model Lion-213K Lion-216K Lion-228K
Type 2 channel power amplifier
Power
(8 ohms stereo)
(4/2 ohms stereo)
(8/4 ohms bridge)

1300W x 2
2200W x 2
3600W x 2

1600W x 2
2700W x 2
4600W x 2

2800W x 2
4480W x 2
8100W x 2
Built in DSP 48 bit
AD/DA converters 32 bit-96kHz
Frequency 20Hz ~ 20kHz
Slew rate >30v/us
Damping factor >300:1
S / N rate >100 dB
THD + N <0.08%@1kHz
Gain: 0 dB ~50dB , step 1dB(electronic attenuator)
Input sensitivity 0 dB ~ +20 dB
Input impedance 30k ohms / >15k ohms(Balanced: Stereo / Parallel)
Protection Overheat,short circuits,Dc,Limit and softstart,Output relay-zero current switch,intellectual clip limit
AC input voltage AC 160v~260v / 50Hz
Dimensions(WxHxD) 483 x 88 x 445(mm)
Net weight(Kg) 14.5 14.5 15


Lion-2 channel Series»

Intelligent power supply of power amplifier



Introduction

2-channel high fidelity high-power stereo output Class D, environment-friendly and energy-saving power amplifier.

The newest Class D power amplifier technology is used to provide stable and flexible control while maintaining excellent sound quality integrity when the power output is huge.

1. Use 20% less energy;
2. Reduce the size of the power amplifier;
3. Reduce the cross-section size of the cable, because the RMS current is less in use;
4. Make the cable transmit smaller because the harmonic of the power frequency is lower. This can reduce the noise and distortion caused by fluctuating power supply;
5. Realize full power output, ultra-long standby, and reduce electromagnetic interference to the power supply by batch installation;
6. The power supply stability is highly indicated, and it can work in harsh environment without external influence;
7. Wide voltage input range: AC AC165V-265V works normally;
8. Advanced protection functions: soft start of power on, DC output protection (power amplifier self-destruct will not damage the speaker), internal automatic voltage limit, short circuit protection can be checked with or without signal output;
9. The sound sounds clear and accurate. Because it USES no negative feedback 16 amplifier circuit and digital filter and other advanced processing technology;
10. Without zero crossing and cross crossing distortion, traditional amplifiers are usually used because of the zero crossing distortion and cross crossing distortion caused by the piping pairing process and each power level adjustment process.



Technical parameter

Model Lion-204 Lion-206 Lion-208
Type 2 channel power amplifier
Power
(8 ohms stereo)
(4 ohms stereo)
(2 ohms stereo)
(8 ohms bridge)
(4 ohms bridge)

400W x 2
550W x 2
780W x 2
960W
1350W

700W x 2
980W x 2
1225W x 2
1690W
2320W

800W x 2
1190W x 2
1490W x 2
2010W
2700W
Frequency 20Hz ~ 20kHz( 1W,8Ω @ ±0.5dB )
Conversion rate ≥60V/µs
Damping factor ≥900 ( 1kHz @ 8Ω )
S / N rate ( A weight ) ≥105 dB
( Rated power 8Ω )
≥108 dB
( Rated power 8Ω )
Intermodulation distortion ≤0.02% ( 20Hz, 20kHz, half power )
THD + N ≤0.03% ≤0.05%
Sensitivity 0.775v/26 ( 1kHz @ 8Ω )
Input impedance 20kΩ ( Balanced ) / 10Ω ( Unbalanced )
Protection DC protection, Short circuit protection, Sensitivity overheat management system, Overheating protection, Input overload protection, over load protection, Limiting protection ( It can reach 10V ), Soft start protection
Output circuit CLASS-D
Cooling system The fully intelligent system automatically adjusts with temperature change
Dimensions 482 x 88 x 290 ( W x H x D / mm )




Model Lion-210 Lion-213 Lion-215
Type 2 channel power amplifier
Power
(8 ohms stereo)
(4 ohms stereo)
(2 ohms stereo)
(8 ohms bridge)
(4 ohms bridge)

1000W x 2
1250W x 2
1600W x 2
2400W
3300W

1300W x 2
1850W x 2
2300W x 2
3500W
4200W

1500W x 2
2200W x 2
2800W x 2
4200W
5200W
Frequency 20Hz ~ 20kHz( 1W,8Ω @ ±0.5dB )
Conversion rate ≥60V/µs
Damping factor ≥900 ( 1kHz @ 8Ω )
S / N rate ≥108 dB ( A weight, rated power 8Ω )
Intermodulation distortion ≤0.02% ( 20Hz, 20kHz, half power )
THD + N ≤0.06% ≤0.07%
Sensitivity 0.775v/26 ( 1kHz @ 8Ω )
Input impedance 20kΩ ( Balanced ) / 10Ω ( Unbalanced )
Protection DC protection, Short circuit protection, Sensitivity overheat management system, Overheating protection, Input overload protection, over load protection, Limiting protection ( It can reach 10V ), Soft start protection
Output circuit CLASS-D
Cooling system The fully intelligent system automatically adjusts with temperature change
Dimensions 482 x 88 x 290 ( W x H x D / mm )

Lion-4 channel Series»

Intelligent power supply of power amplifier



Introduction

4 channel high-fidelity high-power stereo output D class, environmental protection and energy saving amplifier.

Adopts the latest Class D power amplifier technology to provide smooth and flexible handling while maintaining the integrity of excellent sound quality at high power output.

1. Use 20% less energy;
2. Reduce the size of the power amplifier;
3. Reduce the cross-section size of the cable, because the RMS current is less in use;
4. Make the cable transmit smaller because the harmonic of the power frequency is lower. This can reduce the noise and distortion caused by fluctuating power supply;
5. Realize full power output, ultra-long standby, and reduce electromagnetic interference to the power supply by batch installation;
6. The power supply stability is highly indicated, and it can work in harsh environment without external influence;
7. Wide voltage input range: AC AC165V-265V works normally;
8. Advanced protection functions: soft start of power on, DC output protection (power amplifier self-destruct will not damage the speaker), internal automatic voltage limit, short circuit protection can be checked with or without signal output;
9. The sound sounds clear and accurate. Because it USES no negative feedback 16 amplifier circuit and digital filter and other advanced processing technology;
10. Without zero crossing and cross crossing distortion, traditional amplifiers are usually used because of the zero crossing distortion and cross crossing distortion caused by the piping pairing process and each power level adjustment process.



Technical parameter

Model Lion-404 Lion-406 Lion-408
Type 4 channel power amplifier
Power
(8 ohms stereo)
(4 ohms stereo)
(2 ohms stereo)
(8 ohms bridge)
(4 ohms bridge)

400W x 4
560W x 4
700W x 4
960W x 2
1300W x 2

600W x 4
840W x 4
1025W x 4
1440W x 2
2000W x 2

800W x 4
1120W x 4
1400W x 4
1900W x 2
2600W x 2
Frequency 20Hz ~ 20kHz( 1W,8Ω @ ±0.5dB )
Conversion rate ≥60V/µs
Damping factor ≥900 ( 1kHz @ 8Ω )
S / N rate ( A weight ) ≥105 dB
( Rated power 8Ω )
≥108 dB
( Rated power 8Ω )
Intermodulation distortion ≤0.02% ( 20Hz, 20kHz, half power )
THD + N ≤0.03% ≤0.03% ≤0.05%
Sensitivity 0.775v/26 ( 1kHz @ 8Ω )
Input impedance 20kΩ ( Balanced ) / 10Ω ( Unbalanced )
Protection DC protection, Short circuit protection, Sensitivity overheat management system, Overheating protection, Input overload protection, over load protection, Limiting protection ( It can reach 10V ), Soft start protection
Output circuit CLASS-D
Cooling system The fully intelligent system automatically adjusts with temperature change
Dimensions 482 x 88 x 290 ( W x H x D / mm )