Minitype fullrage loudspeaker
KAPPA-24 is using imported membrane group drive unit
It is embedded in daul 4.5" ultra-low distortion unit
The design of KAPPA-24 is symmetrical trapezoidal and flat design
Design for fixed installation, hotels, halls, airports, conferences and so on. KAPPA-24 is a multifunction full range loudspeaker system
| Type | Daul 4.5 inch passive fullrage loudspeaker |
| Drivers | 2 x 4.5"(mm voice coil) |
| Frequency | 152Hz - 17kHz |
| Power (AES) / (PEAK) | 80W / 320W |
| Impedance | 4 Ohms |
| Sensitivity (1W / 1m) | 95 dB |
| SPL / 1m peak | 120 dB |
| Dispersion | 100° |
| Connectors | Phoenix |
| Dimensions (H x W x D) | 254 x 115 x 120 mm |
| Net weight | 1.75 kg |
| Enclosure material | Medium Density Fiberboard |
| Finish | High resistant blank matt polyurea paint |
| Handing position | Custom fixed installation fittings |
| Type | Daul 4.5 inch passive fullrage loudspeaker |
| Drivers | 2 x 4.5"(mm voice coil) |
| Frequency | 152Hz - 17kHz |
| Power (AES) / (PEAK) | 80W / 320W |
| Impedance | 4 Ohms |
| Sensitivity (1W / 1m) | 95 dB |
| SPL / 1m peak | 120 dB |
| Dispersion | 100° |
| Connectors | Phoenix |
| Dimensions (H x W x D) | 254 x 115 x 120 mm |
| Net weight | 1.75 kg |
| Enclosure material | Medium Density Fiberboard |
| Finish | High resistant blank matt polyurea paint |
| Handing position | Custom fixed installation fittings |
If you wish to receive information concerning our products and events please fill in the form below.! - your email address is required.