More about
DT PRO AUDIO
﹀
KAPPA-4X»
Minitype fullrage loudspeaker
- Introduction
- Technical parameter
- Download
-
Related products to KAPPA-4X»
﹀
Introduction
KAPPA-4X is using imported membrane group drive unit
It is embedded in a 4.5" ultra-low distortion unit
The design of KAPPA-4X is symmetrical trapezoidal and flat design
Design for fixed installation, hotels, halls, airports, conferences and so on. KAPPA-4X is a multifunction full range loudspeaker system
﹀
Technical parameter
Type | 4.5 inch passive fullrage loudspeaker |
Drivers | 1 x 4.5"(mm voice coil) |
Frequency | 158Hz - 18kHz |
Power (AES) / (PEAK) | 40W / 160W |
Impedance | 8 Ohms |
Sensitivity (1W / 1m) | 92.5 dB |
SPL / 1m peak | 114.5 dB |
Dispersion | 100° |
Connectors | Phoenix |
Dimensions (H x W x D) | 205 x 140 x 90.5 mm |
Net weight | 1.20 kg |
Enclosure material | Medium Density Fiberboard |
Finish | High resistant blank matt polyurea paint |
Handing position | Custom fixed installation fittings |
Type | 4.5 inch passive fullrage loudspeaker |
Drivers | 1 x 4.5"(mm voice coil) |
Frequency | 158Hz - 18kHz |
Power (AES) / (PEAK) | 40W / 160W |
Impedance | 8 Ohms |
Sensitivity (1W / 1m) | 92.5 dB |
SPL / 1m peak | 114.5 dB |
Dispersion | 100° |
Connectors | Phoenix |
Dimensions (H x W x D) | 205 x 140 x 90.5 mm |
Net weight | 1.20 kg |
Enclosure material | Medium Density Fiberboard |
Finish | High resistant blank matt polyurea paint |
Handing position | Custom fixed installation fittings |